CornerTape


CornerTape - How to...

howto1

Always start with the corners first.

Peel back the white backing paper for approx. 30cm revealing the silver tapes.

howto2

Place the roll flush against the wall, crease in the corner.

Start with overlapping the premasked corners and attach the tape.

howto3
Use the CornerTape grip with the thumb inside the core and the index finger on the outside.
Remove the backing paper whilst rolling the tape down the wall.
howto4
Place the forming tool in the corner preventing dislocation of the tape and unfold to the opposite wall. Repeat every 50 cm and then run your finger to ensure the tape attaches properly.
howto5

Remove the plastic film. Only the metal tape should be left on each side.

howto6

Remember to apply CornerTape to all the corners before applying the silicone.

Apply silicone in the preset gap between the two perfectly parallel silver tapes.

howto7
Smooth the whole joint using the enclosed joint former. Keep the former at a fixed angle, slightly downwards. howto8
Gently remove the CornerTape:
The perfect finish!
more_about how_to_disable tips__tricks

movie
     


Preparation Wipes



Preparation Wipes - How to...

wipe Simply wipe the surface clean.

Do not leave the package open - this will dry out the wipes.
   

more_abouthow_to_disabletips__tricks
movie

Silicone Remover



Silicone Remover - How to...

push Place the Silicone Remover all the way into the corner and simply push the silicone off. pull If more convenient, you can also choose to pull the silicone off.
scrape Or simply scrape the sealant off with the back of the tool.    

To remove residual sealants from uneven surfaces, we reccommend the Residue Remover.

more_abouthow_to_disabletips__tricks
movie

Silicone & Grout Remover



Silicone & Grout Remover - How to...

sgremover_pull Simply pull off the old silicone or residual grout ... sgremover_push ...push...
sgremover_scrape ...or scrape.    

more_abouthow_to_disabletips__tricks
movie

Residue Remover



Residue Remover - How to...

brush2
Simply brush off the old residual silicone from the unevent tiles.

To prevent damage, test the product on a small hidden area. If scratches appear, stop brushing immediately.
   
more_abouthow_to_disabletips__tricks
movie

Silicone Forming Kit



PROSilicone Forming Kit - How to...

howtotoolkit1
Keep the spatula in an even
angle the whole way down
the bead of sealant,
applying a little pressure.
howtotoolkit2
The thick triangle will scoop
up the access sealant.
The thin triangle is perfect for
smoothing sealants in corners.

more_abouthow_to_disabletips__tricks_disable
 movie

Silicone



Silicone